NEW! RABLE10Structure
RABLE10 is our scalable product line for fast, cost-efficient PV on large roofs and on land with restrictions: fewer materials and components per panel, fast installation, and a design that works around weak roof sections and difficult locations.
Applicability on roofs, solar fields or as an exoskeleton
RABLE10Structure (East-West)
on large commercial and industrial roofs
RABLE10Ground (East-West)
on (contaminated) solar fields
Exoclet Application
RABLE10Structure as exoskeleton: project February 2026
- 40 panels
- 4 frames, linked together widthwise
- 14,5 kg/m2
- Fixing by means of 10 anchor clamps
- Free on-site installation training for your first project
- 40 minutes installation time of RABLE10Structure (excl. panels)
The point of using dummy text for your paragraph is that it has a more-or-less normal distribution of letters. making it look like readable English.
Quick installation
Installations must be quick, RABLE's products are easy to install.
Each installer can install the RABLE10Structure for 30 panels per hour. And to ensure you get off to a flying start, we provide standard installation training at the project site.
Responses from our partners
Read below what our customers say about our collaboration
Rable provided excellent support and expertise, with clear communication at all times.
We are very satisfied with the service, the product and the possibilities that substructure makes possible.
Read in our free brochure:
Exoclet Application
RABLE10Structure as exoskeleton: project February 2026
- 40 panels
- 4 frames, linked together widthwise
- 14,5 kg/m2
- Fixing by means of 10 anchor clamps
- Free on-site installation training for your first project
- 40 minutes installation time of RABLE10Structure (excl. panels)
The point of using dummy text for your paragraph is that it has a more-or-less normal distribution of letters. making it look like readable English.
Frequently asked questions from installers
For which roofs is the RABLE system suitable?
The RABLE system is suitable for all flat roofs. For weak roofs it is a unique solution because it is a self-supporting system that distributes the weight evenly over the trusses and/or beams of a roof. The system carries its own weight and that of the panels. It can therefore be applied directly to weak roofs, without structural renovation (and investments) to buildings with limitations in the roof construction. Ballast is also not necessary.
Our mounting system weighs 3 kg/m². The total load including standard panels (approx. 10-12 kg/m²) is a maximum of 13 kg/m². With lightweight panels the maximum load is approx. 7 kg/m².
Is RABLE suitable for roofs with limited load-bearing capacity?
Yes! What makes RABLE unique is that it is a self-supporting mounting system. The system carries both its own weight and that of the panels. This makes it directly applicable to roofs with limited load-bearing capacity, without the need for structural renovations or investments in the roof structure. In addition, no ballast is required.
How is the system attached to the roof?
Our RABLE mounting system uses roof anchors installed at the ends of the structure to effectively manage uplift forces. This system requires up to 100% fewer roof anchors compared to traditional systems, offering a cost-effective solution. For each project, we determine the required number of roof anchors, taking into account factors such as building height and wind zone. This ensures a safe installation with minimal roof load and lower installation costs.
Does it work with any type of solar panel?
RABLE is suitable for all types of solar panels, regardless of weight or size. We use industry standard mounting clamps and also take into account the different dimensions that panels can have.
Are there installers who use RABLE systems?
Various installers throughout the Netherlands, both small and large, are active with RABLE. Do you also want to become familiar with the RABLE system? Simplicity becomes one of our partners by to schedule an appointment with our sales. Looking for an installer who can design your project with RABLE? Click here to get in touch with our team.
How does RABLE help me in project preparation?
Every installation situation is unique and our team is ready to answer specific questions and provide support throughout the planning and installation process. We advise customers to share their project details with us for a personalized installation and anchoring plan and a detailed quote. RABLE has a good relationship with the roofing contractors and can quickly switch on the application of a solar installation with RABLE. Need help? Contact us.
What certificates are there?
RABLE system has the required certificates regarding corrosion requirements and NEN 1010. Laying plans are supplied in accordance with the requirements of NEN 7250, based on, among other things, the Eurocodes for snow and wind loads. We also have a wind tunnel certification that you can find under ''downloads'' on our website.
Do RABLE tension cables cause energy loss?
The steel cables cause a limited shadow cast, which results in a yield loss < 3%. Good to know that the RABLE has a walkway every 4 panels (instead of every 2 panels with a traditional mounting system). This more than compensates for the small amount of energy loss of the steel cable.
Which types of roofs are suitable for our system?
Our system is suitable for flat roofs with a slope of up to 10 degrees and works on all types of roofing such as EPDM, PVC and Bitumen, and on steel and concrete roof panels.
Please contact on with RABLE
Simply contact us using the form on the right. We will respond as soon as possible.
Would you like to schedule a no-obligation appointment right away?
Leave your details here back and we will contact you as soon as possible.